– INPA Windows 10 bit Installation Guide

- Advertisement -

Looking for:

- Advertisement -

Fast Way to Install BMW INPA Standard Tools on Windows 10 | OBDIIcom Official Blog

- Advertisement -

Click here to Download

- Advertisement -

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Blow away your previous installation of Windows and start over with a fresh install. Now that you have the two folders needed to bootstrap INPA 5. Depress the Windows logo key to display the Start menu. Reason: broken link to winkfp import guide. Appreciate StradaRedlands Here my answers to some Frequently Asked Questions, in no particular order. I will update this FAQ over time. This is not intended to replace, but rather augment official BMW Group documentation.

What are integration levels? Also referred to as I-level , I-step , and I-stage During development of a given chassis i. An integration level is a defined vehicle configuration from an electrical standpoint hardware and software that is validated by BMW. How do I determine the current integration level of my vehicle?

You can display your current dealer integration level with INPA Do I need a newer SP Daten to code my vehicle? That depends upon your current integration level. Your integration level tells you the minimum SP Daten needed to code your car. You can always use a newer SP Daten if you wish, but it’s not necessary.

I’m not sure which SP Daten I have. How I can determine which integration level it supports? The supported integration level can be found in the KMM database. This is an example from SP Daten Reason: Added question 11 to the FAQ. CarAbuser Reserved for future use. Appreciate 0. Reserved for future use This is a painfully long way to install these tools. It does everything for you. Then you just copy your ECU, daten, config, profile, and scripts to their respective directories and your done.

I just did a W10 install for someone. I had to run the 2. Originally Posted by matteblue3er. I used your old guide for my Win7 32 bit installation.

I just ordered a new Surface Pro and intend for that to be my new coding rig as well. Originally Posted by Nitrousbird. Originally Posted by AWDxi. There is no need to re-install INPA 5. Be sure to stop by and let us know how the Surface Pro works in tablet mode!! Awesome write-up, bookmarked this thread That will save me some time. I should have it installed in about a week. I’m interested to see how well it works with a touch screen.

Originally Posted by devildogae. Thank you for this clear and well explained tutorial! Is this easy to do? Not need to install the software,very easy to use! Just copy the software to your PC from CD. All the function on software is activated ready, and can directly to use it. No need to pay extra fee to open the software anthorization.

Previous Next. Software version: V5. Support language: English 3. Click Weiter. Ensure OBD is selected. Press weiter. Ensure Komfort. IPO is selected. Press OK. Let install. Press ok, and again. Press any key to continue.

Select Ja,Computer jetzt neu starten. Click Breeden. This will restart your PC as needed. Phase 2 1. Set it up to run in compatibility mode as mentioned in Phase1, step 3. Then double-click to launch. Press OK if prompted. Select Enlgish then press weiter.

Press continue and continue again. Ensure destination is under C: 4. Press continue. Check off all white boxs. There will be 2 update and 1 complete that needs to be checked. Press continue, and again.

You may get error. Otherwise, press End. Restart your PC once more manually. Phase 3 1. Under INPA 5. Under NCS Expert 3. Click on Rename. In the box, type the number 1 and press continue, and again. You might gett error. Ignore it. IF prompted, press End.

Phase 4 1. You will from now on use ONLY that port. Windows 10 also already has a serial function. This is all we need to modify. In your search box lower left of screen next to Windows button , type “Device Manager”. Click on the top option. I bought a cable off the net that seems to connect. I am getting errors when I try to access any of the options. See images for the errors. Brief description of what I was doing when I got the errors below.

The problem if it matters for issues with the software that I am having The problem is that the ABS light and traction control light are lit on the dashboard. The computer is telling me the front left wheel speed sensor is bad.

I have put the sensor on the front right and the computer still said front left speed sensor out. I had a shop look at it, they said they tested everything in the ABS system from the wheels to the control unit and have decided it is the control unit. I have a replacement that came out of a car nearly identical to mine with fully functioning ABS.

Fourth Image: Here’s the main page when I load it up with the cable connected. Sorry the images are huge, I didn’t have time to size them down. Any help with this would be awesome. I don’t really want to pay to have this done when I can do it myself. Attached Images. That helped a little. I get the same error first image.

It will now read engine information though. That’s an improvement. I cannot look at anything in pretty much any other section, it gives me an error similar to the first image. Is it my crappy soldering job? The cable? Thanks for your help. Latency is set to 1, my soldering job isn’t pretty It’s a knockoff cable so maybe it has issues on its own. I don’t know about module selection Pretty much the only area of INPA that works is the engine area.

Nothing else loads. Buying a new cable isn’t an option right this moment. My soldering iron was having problems getting hot enough to get a good solder, so I suppose that could be it. By modules, do you mean the options I can select? It doesn’t look like it.

 
 

 

Easy, effective, BMW tools install on Windows 10 64bit

 

Click Next. Click OK to acknowledge that the backup wizard has been deactivated. When prompted to restart, select No, I will restart the computer later. Click Finish to return to the Program Compatibility Troubleshooter. Select Yes, save these settings for this program.

Select Close the troubleshooter. Restart your system. It assumes that you understand command line syntax. In this context, X: denotes an unknown drive letter i. The drive letter and path to the source file s is dependent on where you stored the files. In the Start menu search box type the following and right click on the Command Prompt Desktop app. BAT script. When the cmd. Install the patched bit NCS Expert.

If you found this DIY useful, please click on the Appreciate button at the bottom of this post. Appreciate 38 milfriez Do not edit.

How do I determine the part number of an installed module? You can display the part numbers of all installed modules and lots of other useful information with INPA RealOEM shows that the full part number is 7 – – I want to flash reprogram a module in comfort mode with the WinKFP tool. I don’t see my module listed Example: The part number for my EGS module is How do I determine the ZB number of the software that my module is currently programmed with?

No, absolutely not. If you flash various modules on an ad-hoc basis with UIF writes enabled, the vehicles configuration will no longer align with any defined integration levels as validated by BMW. This could create a myriad of problems should you ever need to have the vehicles software updated by a BMW dealership. Is that true? No, BMW can easily identify the fact that you flashed the transmission.

Even if UIF writes were disabled. Open the GKE Example: The transmission was flashed with ZB Here is an excerpt from the GKE Open the. Here are the first few lines from the A It is conclusive evidence that the transmission was flashed with ZB Why are the various data files collectively referred to as a SP Daten?

Press any key to continue. Select Ja,Computer jetzt neu starten. Click Breeden. This will restart your PC as needed. Phase 2 1. Set it up to run in compatibility mode as mentioned in Phase1, step 3. Then double-click to launch. Press OK if prompted. Select Enlgish then press weiter. Press continue and continue again. Ensure destination is under C: 4. Press continue. Check off all white boxs. There will be 2 update and 1 complete that needs to be checked. Press continue, and again.

You may get error. Otherwise, press End. Restart your PC once more manually. Phase 3 1. Select English then press weiter. Long press the lock button for two seconds to achieve automatic folding mirror 3. After the flameout, the wiper automatically returns to the position.

Display the digital speed in the center of the meter 5. After turned off the flame , the key pops out from the keyhole and other functions. How to download INPA software? Essentially all I’ve done here is learned his method and compiled some instructions on it. In case you were wondering, I did make this DIY with his permission. Also, this method seems to be very effective and simple, “Mike’s Easy BMW Tools” didn’t work for me at all, and some of the other methods seem quite involved just to simply install some software.

Continue at your own risk. I am not responsible in any way for any damage that occurs to your car as a result of this information and software. The first thing you want to do is download the BimmerGeeks Standard Tools file from his website.

The link is bimmergeeks. Once downloaded, expand the. At this point you should have several. Next, select all the. We’ll need them later. The first thing you want to do here is run the executable, if you’re installing o a newer version of windows you will have to run it in compatibility mode.

To do this, right click the. Now you should get through the installer without any problem. Next what you want to do is go into your C drive and remove several folders completely. Now you want to replace them with the ones from the. Simply move the contents of all the. This is a convenient time to go in and create shortcuts for all the tools.

Next find your CMD prompt application, right click, and click “run as administrator. At this point your software should be functional.

BimmerGeeks did some nice things on mine where he changed some icons and names to make it look better. I can put directions up on how to change icons if you need to know.

Let me know if you have any questions or if there are any steps that are incorrect or unclear. If there’s anything I can’t figure out I’m sure BimmerGeeks will have no problem with solving it.

I’d like to give a big shout-out and thanks to BimmerGeeks for helping out with this, there really wasn’t an easy way to get this software installed until now so I’m very appreciative of him sharing this information with us!!!! Pre-Installation 1. Download all required files and programs,as listed below. Extract the INPA. You will be left with INPA folder. Extract INPAcable. You will be left with INPA cable folder. Installation — Phase 1 1. Open Entpackt folder. Also, check the box for Run as Administrator.

Hit Apply then Ok. Once window pops up, select Windows XP. Click Weiter it means Next. Click Weiter 3 more times. Make sure User Mode is selected.

Click weiter. Make sure top choice is selected 1 Parametri……. Click Weiter. Ensure OBD is selected. Press weiter. Ensure Komfort. IPO is selected.

 
 

Bmw inpa windows 10 download. INPA Windows 10 Download Free: Confirmed to Work Perfect!

 
 
BMW INPA Ediabas Windows 10 bit Installation Guide · ad all required files and programs,as listed below. Also you should have the K+DCAN cable in your. OBDSTAR P50 $, Autel MaxiIM KM $, X PRO5 $1,, OBDSTAR X DP Plus $ ad all required files and programs,as listed below. Also you should have the K+DCAN cable in your posession(link provided below).

- Advertisement -

READ THIS ALSO

Jharkhand Varta

Related Articles

मुख्यमंत्री श्री हेमन्त सोरेन मोरहाबादी मैदान और अरगोड़ा मंडा मैदान में आयोजित रावण दहन कार्यक्रम में हुए सम्मिलित

रांची:- मुख्यमंत्री श्री हेमन्त सोरेन आज विजयदशमी के अवसर पर पंजाबी -हिंदू बिरादरी दशहरा कमेटी की ओर से मोरहाबादी मैदान और श्री...

श्री बंशीधर नगर: धू-धू कर जला रावण का अहंकार,पूर्व विधायक बोले- अधर्म पर हुई धर्म की विजय

शुभम जायसवालश्री बंशीधर नगर :-- न्याय की अन्याय पर, सदाचार की दुराचार पर धर्म के आधार मतलब गर्व की अहंकार पर,बुराई पर अच्छाई की,...

देवी मंडप नवयुवक संघ बुंडू ने किया सैकड़ों भक्तों के बीच खीर वितरण

बुंडू:- नगर स्थित देवी मंडप नवयुवक संघ बुंडू के द्वारा मंगलवार को नवमी के मौके पर सैकड़ों श्रद्धालु के बीच प्रसाद रूपी...
- Advertisement -

Latest Articles

मुख्यमंत्री श्री हेमन्त सोरेन मोरहाबादी मैदान और अरगोड़ा मंडा मैदान में आयोजित रावण दहन कार्यक्रम में हुए सम्मिलित

रांची:- मुख्यमंत्री श्री हेमन्त सोरेन आज विजयदशमी के अवसर पर पंजाबी -हिंदू बिरादरी दशहरा कमेटी की ओर से मोरहाबादी मैदान और श्री...

श्री बंशीधर नगर: धू-धू कर जला रावण का अहंकार,पूर्व विधायक बोले- अधर्म पर हुई धर्म की विजय

शुभम जायसवालश्री बंशीधर नगर :-- न्याय की अन्याय पर, सदाचार की दुराचार पर धर्म के आधार मतलब गर्व की अहंकार पर,बुराई पर अच्छाई की,...

देवी मंडप नवयुवक संघ बुंडू ने किया सैकड़ों भक्तों के बीच खीर वितरण

बुंडू:- नगर स्थित देवी मंडप नवयुवक संघ बुंडू के द्वारा मंगलवार को नवमी के मौके पर सैकड़ों श्रद्धालु के बीच प्रसाद रूपी...

जय श्रीराम के नारे से गुंजा आकाश न्यू आदर्श शिक्षित बेरोजगार संघ चौरियों द्वारा किया गया रावण का पुतला दहन।

गढ़वा : खरौंधी प्रखंड अंतर्गत ग्राम चौरिया में न्यू आदर्श शिक्षित बेरोजगार संघ द्वारा विजयदशमी के अवसर पर रावण का पुतला दहन किया गया...

श्री बंशीधर नगर: दशहरा आज “करें मां का दर्शन”, मेले में आए श्रद्धालु को करने “रक्षा, चारों तरफ पुलिस बलों की है सुरक्षा”

शुभम जायसवालश्री बंशीधर नगर :-- कोरोना काल के दो सालों के बाद इस वर्ष विजयादशमी पर्व यानी दशहरा अनुमंडल मुख्यालय सहित आसपास के इलाकों...